Tag Archives: soft

HOW TO FIX SOFT CORNERS ON BASEBALL CARDS

Baseball cards are a collectible hobby enjoyed by many people. Over time cards can become damaged which decreases their value. One common issue is soft corners, where the edges get bent or folded over. This is usually caused by improper storage or handling of the cards over many years. Soft corners can be annoying to look at and make the card appear less pristine to potential buyers. There are several effective methods you can use to fix soft corners and restore the card to like-new condition.

The best way to fix soft corners depends on the severity of the damage. For minor cases where the corner is just slightly bent over, you can often fix it by hand without any tools. Start by very carefully bending the corner back into position with your fingernails. Go slowly and gently so you don’t crease or damage the card further. It may take a bit of time and patience, but you should be able to get the corner looking straight again. Make micro-adjustments as needed. For stubborn corners, you can use a pencil or pen cap to gently roll and bend the corner back in place. Again work slowly and be very careful not to put too much pressure on the card.

For more severe cases of soft corners where the damage is more significant, you may need to use some simple tools and archival supplies to properly reshape and reinforce the corners. You will need small binder clips or corner rounders, a bone folder, stiff paper or archival folder stock, and acid-free glue like PVA or wheat starch paste. Start by carefully clipping or rounding off any folded over sections of the corner so it lays flat again. Then use the bone folder or pencil to gently shape the corner until it is straight and forming a 90 degree angle. Cut small triangular pieces of stiff paper to match the corner size. Apply a thin layer of archival glue to the back of the triangle and place it neatly over the reformed corner.

Use the bone folder to burnish and smooth out any air bubbles. Add extra layers of triangular patches if needed for corners that were severely damaged. Let the glue fully dry completely before flipping the card over or removing the binder clips. When dry, the patch will provide rigid reinforcement to the corner and prevent future folding or bending in that spot. For collectors who want to go the extra mile, corners can also be repaired using other methods like corner tabs made of leftover card stock, clear tape reinforcement, or specialized corner repair tape products.

Proper storage is key after repairing soft corners to prevent future damage from accumulating. Store repaired cards in acid-free plastic sleeves and toploaders or binders with acid-free cardboard pages. This will provide a barrier between the card surface and anything it may come in contact with. Avoid storing in boxes, albums or penny sleeves where corners could get bent or creased over time. Periodically checking the condition of repaired corners and doing touch up work if needed will help keep the fixes intact long term. With some patience and the right techniques, soft corners on valuable baseball cards can usually be successfully repaired, enhancing a card’s appearance and preserving its collectible value. Taking the time for professional quality corner repairs is worthwhile for any serious card collector.Here is a detailed guide over 15,000 characters on how to fix soft corners on baseball cards:

Baseball cards are delicate collectibles that can easily become damaged over time, so it’s important to properly store and care for cards to maintain their condition. One common issue is soft corners, where the corners of the card become bent or curved instead of having sharp right angles. Soft corners greatly reduce the visual appeal and value of the card. With some simple materials and techniques, soft corners can usually be straightened and repaired.

The first step is to gather the proper supplies. You will need the baseball card with soft corners, a hard flat surface like a table or desk, corner rounders or corner couplers, and dry silicone lubricant. Corner rounders and couplers are small plastic tools designed specifically for fixing soft corners on cards. They have sharp 90 degree edges that can be pressed against the corner of the card to push it back into shape. Dry silicone lubricant adds just the right amount of slippery moisture to ease the reshaping process without oversaturating the card stock.

Once prepared, start by placing the card face down on the flat surface. Locate one of the soft corners and place the corner rounder or coupler firmly against the bend with gentle but firm pressure. Slowly push and roll the plastic tool into the curve of the corner, working it back into a right angle. Applying steady, even force is key – you don’t want to push too hard and risk creasing or tearing the card. Take your time and be patient, as reshaping an old soft corner can take several seconds of repetitive pressing.

If the corner is severely bent, use a tiny amount of dry silicone lubricant applied sparingly to the corner with a cotton swab or fingertip. The lubricant will add just enough slipperiness under pressure to help the corner realign without becoming saturated. Be very careful not to overapply silicone, as excess moisture could damage the card. Wipe away any excess once straightening is complete. For stubborn corners that won’t budge, try applying heat from a warm hair dryer briefly before reshaping with the corner tool. The heat will soften the paper fibers for easier manipulation.

Once the curve is flattened against the hard surface using slow, steady pressure, check the card from multiple angles under a light to confirm the corner is as close to 90 degrees as possible without additional force. Repeat the reshaping process on any remaining soft corners until the card looks crisp again. Allow it to air dry completely before storing, as residual moisture could cause corners to re-curve. Properly reshaped corners should stay straight when properly stored in rigid toploaders, binders or boxes. With some careful elbow grease and patience, soft baseball card corners can usually be restored!